Eat, enjoy and talk! The combination of Loop Cone at the centre of 6 surrounding HopOp 500 opens up new opportunities for creating small, informal seating groups. A table-and-bench set where form, material and colour unite to form fun, maintenance-free furniture.
LOOP Picnic HopOp500 constitutes an alternative to traditional table-and-bench sets.
All good conversations involve sitting down together.
The Viking assembly featured large stones placed in a circle, often with a larger stone in the middle — the thingstead. All were welcome to put their case to the thing and judgement was passed only after thorough discussion.
Perhaps Loop Picnic is the thingstead for our time? Certainly this is a spot in which to sit and talk, eat, play, and enjoy.
Loop Picnic is designed by AART Designers and out-sider.
Material
Rotation moulded polyethylene, 6 mm thick, dyed. UV-resistant, stands up to weather, wear and tear. The material is suitable for granulation and recycling.
Surfaces and friction
HopOp500: The products have a textured/granulated surface due to abrasive blasting of the mold. This process enhances the friction and makes the surface less slippery.
Table: Slightly rough surface. Top: Smooth surface
Authentication
HopOp500 is TÜV approved as playground equipment acc. EN1176
Dimensions
Loop Picnic is combined of Loop Cone + Top plate + 6 units HopOp500.
Loop Cone: Top: Ø1130mm / Bottom: Ø810mm / H700mm
HopOp500: Ø500 x H400mm / Volume: 70 liter.
Combinations
Loop Cone and HopOp500 can be combined with various numbers of HopOp. Recommended no: 6.
Color Choices
All pieces are the same colour. Cone, table top and HopOp seating may be ordered separately for different colours combinations.
Mounting
Loop Cone and HopOp500 assemble using a single fitting (B14) that also bolts into the ground. (Predefined distance between table and seating, visible fitting)
Loop Cone and HopOp500 can also be individually mounted — see instructions for mounting (Individual distance between table and seating, bracket may be hidden if buried).
Recycled and ecolabelled*
Recycled version is made from 100% recycled polyethylene plastic, of which 85% comes from internal waste and production surplus, while 15% comes from. polyethylene bags.
Recycled version is ecolabelled, promoting circular economy and fulfils UN’s sustainable development goal no.12 – Responsible consumption and production.
Recycled version is available in anthracite variant, yet colour can vary from order to order.
Maintenance
This product withstands most cleaning agents and chemicals and can be cleaned using a high-pressure cleaner. The colour can be revived using vinyl cleaner or similar.
Family
Loop, Loop Light, Loop Arc, Loop Line, Loop Corner
Tender
Combining Loop Cone as a table surrounded by 6 HopOp500 form a bench-and-table seats.
Material: Rotation moulded polyethylene, 6 mm thick, dyed.
Loop Cone: Bottom: Ø1130mm / Top: Ø810mm / H700mm
HopOp500: Ø500 x H400mm / Volume: 70 liters.
Fixation: For ground and surface fixation or fill with water/sand.
Product code
172 0101 Loop PicNic HopOp500 red / 58kg
172 0102 Loop PicNic HopOp500 limegreen / 58kg
172 0103 Loop PicNic HopOp500 orange / 58kg
172 0104 Loop PicNic HopOp500 yellow / 58kg
172 0109 Loop PicNic HopOp500 purple / 58kg
172 0111 Loop PicNic HopOp500 sandstone / 58kg
172 0113 Loop PicNic HopOp500 grey / 58kg
172 0117 Loop PicNic HopOp500 blue / 58kg
172 0115 Loop PicNic HopOp500 pastel blue / 58kg
172 0116 Loop PicNic HopOp500 mocha brown / 58kg
172 0118 Loop PicNic HopOp500 olive green / 58kg
172 0150 Loop PicNic HopOp500 white / 58kg
172 0120 Loop PicNic HopOp500 rerycled anthracite / 58kg
B14 Mounting bracket PicNic
B11 Bracket for surface fixation Loop Cone
B8 Bracket for surface fixation HopOp 500
B9 Bracket for ground fixation HopOp 500
The table top is easily placed and mounted in the bracket by the guiding rubber fittings - and can be fine tuned to level with the top of the Loop Cone. Also, see our mounting instruction.
